|
CircuitWerkes Sicon-8, Recordable, Talking
Remote Control
(with Internet Web Server & Setup/Control
software included)
Affordable power for every facility
 .
The Sicon-8 is a modestly-priced, but full-featured
dial-up remote control with speech capability.
Based on voice recording technology, the
Sicon-8 can speak in your staff's language
because you record your own messages.
The Sicon-8 was designed
to be a complete
solution for facilities
with basic to moderate
control requirements.
All of the I/O, including
8 channels of relays,
are included on the
main board so there
is no need to buy anything
else to use the product.
All metering, status
and control connections
are on depluggable
screw terminals.
An expander chassis, the
SX-8, adds eight
channels of metering, status
& control to
an existing Sicon-8. Up
to three SX-8s may
be added to a Sicon-8
for a maximum of
32 channels.
Designed to be controlled from the onboard
Ethernet interface, any dial-up telephone,
an auto-answer cell phone or its serial port,
the Sicon-8 gives you the control options
that you need. The onboard Web server gives
access to all of the Sicon-8's metering,
Status & basic control functions &
supports several simultaneous users with
4 different access levels. The Web server
requires no software other than a Java capable Web browser to
operate and works on multiple operating systems
and browsers. The dial-up control is based
on proprietary voice recording technology
that lets you record your own messages, in
any language, and is smoother sounding than
most other voice recording technologies.
|
|
|
You've been asking for years!
Now there is a new remote control designed
to fit your needs AND your budget!
| Features |
| > |
Speaks every language in the world because
you record your own messages. |
| > |
Dial-up, site controller with balanced audio
pass through
and 8 channels
of metering,
status and
control. Has
up to 5 alarms
per
channel. |
| > |
Optional 8-channel expansion module gives
you up to 32 total channels. |
| > |
All connections are on depluggable screw
terminals right
on the main
chassis. No
additional
panels are
needed for
operation. |
| > |
X10 option adds inexpensive additional control
over existing
electrical
wiring. |
| > |
Future free Windows interface program with
multi-site capability lets you setup or monitor/log
the Sicon-8 (but is not required for standard
operation). |
| > |
Basic time of day/date automation (event
scheduler) functions are built-in. |
| > |
Web Server/Ethernet interface lets you control
the Sicon-8 over your network or the Internet. |
| > |
Cell phone audio interface lets you use the
Sicon-8 with
any auto-answer
wireless phone.
Great for sites
with no phone
service! |
| > |
Front panel programming port lets you
program the Sicon-8 without a computer
or telephone line. |
| > |
Telephone interface, voice codec, Webserver
& all
relays are on easily replaced daughter boards. |
| > |
Uses heavy 5 Amp, SPDT relays on channels
1-6 for maximum flexibility. |
| > |
1 Amp, DPDT relays on channels 7 & 8
can be programmed for latching or momentary. |
| > |
Pre-programmed for English (Spanish on request)
& is easily
re-recorded. |
|
A detailed PDF datasheet for the Sicon-8
can be downloaded here.
Click here to get the manual (PDF)
|
Below: The Sicontroller remote interface
software (main display)
 Click here or on the picture of the software for more
info about the FREE software interface for
the Sicon-8
The Sicon-8 software can connect to your
Sicon-8 via serial port, Web server or modem.
Multi-site capability lets you monitor multiple
sites from a central location. Software also
makes setup a snap, but the Sicon-8 is fully
functional even without the software.
The Sicon-8's Onboard Web-server:
The onboard Web server duplicates much of
the Sicontroller software's control functions
and runs on any Java capable browser.
As shown below, the Web server is designed
to be uncomplicated and will run on multiple
platforms and browsers, provided that they
are Java capable. It even works on the iPhone's
Safari browser. Meters are updated aproximately
every two seconds and the Web server shows
the current meter values, channel status
and alarms.
|
The Sicon-8's Web server allows for 4 different
access levels:
Reader - Can not operate any controls. All
controls are hidden from readers.
Controller - Can operate any control on the
main page but cannot perform or access any
setup functions
Administrator - Has access to all functions,
except top level password changes.
Super-Administrator - Similar to the administrator,
the Super-Admin is the only one that can
change their own password. This user level
is designed to protect owners from being
locked out of the Sicon-8.
|
|
