CircuitWerkes Remote Broadcast Tools

CircuitWerkes remote broadcast equipment comes in two main varieties, telephone based and non-telephone. Non-telephone equipment is used to interface audio or control tones to various audio feeds ranging from RPUs to Satellites. Telephone equipment can, generally, be broken into two sub-catagories: Studio-Site and Remote-Site. Studio equipment would be the stuff that you might put at your studio that would interface audio to/from your system. The remote gear is designed for field use, but often can be used at the studio as well.

All prices are in US Dollars

Click on the photos below for detailed product brochures.

Picture Description List Price AC-12 Rack-mounted bank of up to 12 autocouplers (AC-1s) with dual audio busses & individual card audio I/O ports. Ideal for telephone broadcast networks, church service feeds to shut-ins, IFB (works well with intercom systems), and much more. Available Options: AC-12 PS, AC-12 PSC, AC-12 PSE Typically found in the studio environment $349.00 (AC-12) AC-1 Coupler cards for AC-12. Cards are hot-swappable and can access either audio buss, or can be used to send or recieve individual audio. Can only be used in the AC-12 frame Available Options: CP-1 $175.00 (AC-1) AC-1h Coupler cards for AC-12 with most features above and adding microprocessor control, active hybrid, send audio active limiter, and active balanced audio I/O. Available Options: CP-1 $219.00 (AC-1h) CP-2 Stand-alone call progress decoder works with any coupler device. Forces devices to disconnect at the end of a call. Available Options: None $167.00 (CP-2) DR-10 Dial-up remote control with audio pass through. Works with most automation systems to allow unattended live remote broadcasts. Can also be set to cut into a broadcast for emergency warnings or quick announcements. See Also DT-232 & TAC-5) Available Options: CP-1, Silencer Typically found in the studio environment $399.00 (DR-10) DT-232 Dial-up, password protected, DTMF control with simple audio interface, fully programmable bi-directional DTMF to RS-232 converter & 4 relay outputs. See Also DR-10 & TAC-5) Available Options: RM-01, RM-02 $269.00 (DT-232) GENr8 Programmable DTMF tone encoder / generator controlled by RS232 or contact closures. Can be used to control insertion equipment over audio lines. Available Options: RM-01, RM-02 Typically found in either the studio environment or remote environment $259.00 (GENr8) HC-3 (formerly AC-3) Hybrid telephone autocoupler. Automatically connects telephone audio to or from your equipment. Available Options: CP-1, C-LOCK2, RM-01, RM-02 Typically found in either the studio environment or remote environment $259.00 (HC-3) MicTel Portable amplified Mic/Line to telephone interface. Improved replacement for the Gentner Microtel. Can be used to send & receive audio from a phone line or can be used as a very high quality field mic and headphone amplifier. It's a great addition to any remote kit. Available Options: None Designed for the remote environment, but frequently used in studios. $310.00 (MicTel) SEN-6 Subaudible tone encoder with balanced, filtered output. Can be used to send automation tones mixed with normal program audio without being heard. Does not work with standard dial-up telephone lines, but does work through many POTS frequency extenders. Available Options: RM-01 Typically found in the studio environment $399.00 (SEN-6) Silencer II Stand-alone, muted, 50ms, 7kHz bw, audio delay removes DTMF tones. Great item for removing DTMF (touch-tones) from single audio lines. Has 7.5kHz audio bandwidth. Cannot be used for stereo feeds. Great for overhead paging systems and remote broadcasts. Available Options: RM-01, RM-02 Typically found in the studio environment $189.00 (SIL-II) Silencer - 3 Stereo (Dual Channel) digital DTMF mute. 20kHz audio & 80dB SNR. $299.00 (SIL-3) Sub-03 25/35/combo subaudible tone decoder w/balanced, filtered audio output. Used to provide contact closures for many satellite content providers. Can also be used with our SEN-6 to provide control over any high-quality audio line. Available Options: RM-01 Typically found in the studio environment $379.00 (SUB-03) TAC-5 Dial-up Remote Control with audio pass-through. Inexpensive alternative to the DR-10 with fewer outputs and functions but some new features. See Also DR-10 & DT-232) $319.00 (TAC-5) TelTap Manual telephone coupler and passive telephone listener. Send half-duplex audio to/from any POTS telephone line. Great and inexpensive addition to your remote kit. Available Options: None Designed for the remote environment, but frequently used in studios. $99.00 (TelTap) Remote Broadcast Equipment Options AC-12 PS Additional wall power supply for AC-12 frame. $40.00 (AC-12 PS) AC-12 PSC Additional power supply card for AC-12 frame. $170.00 (AC-12 PSC) AC-12 PSE Additional European power supply card for AC-12 frame. $60.00 (AC-12 PSE) CP-1 Call progress decoder daughterboard for AC-1, DR-10, and HC-3. $109.00 (CP-1) C-LOCK2 Combo-lock for stand alone HC-3. Provides security with up to 8 digit password required to access the coupler. Causes the coupler to hang up in 10 seconds if no password is entered. $99.00 (C-LOCK2) CW PS Additional standard CW power supply. Specify product at purchase. $25.00 (CW PS) RM-01 Rack mount for single device. Specify product at purchase. $28.00 (RM-01) RM-02 Dual rack mount for two devices. Specify product (HC-3, DS-8, DTMF-16, DT-232, GENr8, HC-3, SIL-II) at purchase. $30.00 (RM-02) Silencer Muted audio delay (50ms, 7kHz bw) removes DTMF tones. Available as a daughterboard for the DR-10, DS-8, and DTMF-16. $169.00 (Silencer)